All content related to control of aircraft surfaces to include rudders, yokes, trim wheels, brakes, etc.
It has been a long while since I wrote Part 1. Hard to believe. It took time to get things finished up and generally working, and then the rest of the sim had to be built back up on top of it. Throw a bit of “life happens” and dips in motivation and time just …
Permanent link to this article: https://www.simobsession.com/blog/linked-control-columns-loading-part-2-the-pitch-axis/
“Try not. Do or do not. There is no try.” —Yoda, Star Wars Episode V: The Empire Strikes Back Introduction One of the things I’ve wanted for a long time is linked control columns, and it’s the last major item needed to complete my reasonable recreation of a Boeing 737-800 cockpit. In Part 1 of …
Permanent link to this article: https://www.simobsession.com/blog/linked-control-columns-loading-part-1-may-the-force-be-with-you/
Time to start enclosing my cockpit shell with a rear bulkhead.
Permanent link to this article: https://www.simobsession.com/blog/adding-realism-to-your-boeing-737-cockpit-rear-bulkhead/
I have been lacking a couple of major components to mostly finish out the Captain side, one of which is a set of rudder pedals (the other being seats). I have a seat already, and I’m slowly getting around to refurbishing it, but I really needed rudder pedals. They are critical to flying, no matter …
Permanent link to this article: https://www.simobsession.com/blog/point-me-in-the-right-direction-rudder-pedals/
I created this site for enthusiasts to buy and sell their simulator parts for free. No gimmicks, no tricks, it's just easy. Visit https://www.ineedsimparts.com
Need your custom designs laser cut, bent, and/or drilled out of metal or other material? Need to make things like brackets, mounts, frames, or small one-off items? Then I highly recommend SendCutSend.com. It's an exceptionally affordable, extremely capable, easy to use, and super friendly online place to make any size or quantity custom-designed parts for your simulator or any other project. I know because I've had them make a ton of parts for me and I couldn't be happier! I'm not sponsored, just a very satisfied customer.
Flight Simulation Association (FSA) is an association of flight simulation pilots, virtual air traffic controllers, and developers and content creators. By joining, members get access to exclusive product discounts, webinars, guides, and the ability to search for and find nearby simmers. Learn more and subscribe at www.flightsimassociation.com!
North America’s community-driven flight simulation conference. Learn more at www.flightsimexpo.com.
Just yesterday I finished building the same but used FDS 737 Shell together. The overhead supporting structure that I see…
Thanks. I updated the Markus Pilot reference, and the other measurement site apparently no longer exists unfortunately.
Most links are out of date
Hi, if you mean the two rails that run from front to rear and the cross strut, yes those came…